Installing Xcapi - GFI FAXMAKER Installation Manual

1.5 Installing XCAPI

XCAPI is a software-only Fax over IP (FoIP) solution from TE-SYSTEMS. This topic explains how to
install XCAPI on your GFI FaxMaker server
1.5.1 Installing XCAPI
Install XCAPI during the GFI FaxMaker Configuration Wizard, either after installation, or by launching
it manually from Start > GFI FaxMaker > FaxMaker Configuration Wizard.
1. In the Welcome page of the GFI FaxMaker Configuration Wizard click Next to continue.
NOTE
Some GFI FaxMaker services may be restarted when running the configuration wizard.
Screenshot 15: Selecting the XCAPI option
2. Click ISDN / CAPI devices, and select TE-SYSTEMS XCAPI Fax over IP. Click Next.
3. Click YES to start the XCAPI installation wizard.
NOTE
1. XCAPI is pre-packaged with GFI FaxMaker. No additional downloads are required.
2. Only one CAPI device can be installed on the same system. For more information, refer to:
http://go.gfi.com/?pageid=FM_CAPIDeviceFound
4. Select the language used to install XCAPI and click Next.
5. In the Welcome page, click Next.
6. Click Yes if you accept the End User License Agreement.
7. Click Next to install XCAPI in the default location or Browse to select a different path.
GFI FaxMaker |
1 Installing fax devices 14