Sensitivity - Panasonic Lumix DMC-TZ5 Operating Instructions Manual

REC/PLAY switch:
Shutter speed and ISO sensitivity are displayed in the screen for a few seconds after
recording.
If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (P.62).
Blurring may occur depending on brightness, and size, position, and speed of
movement of the subject (e.g. if subject is too small, is on edge of picture, or starts
moving as soon as shutter button is pressed).
Scope of flash recording (P.39)
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
Set-up: Mode dial
Settings: AUTO / 100 / 200 / 400 / 800 / 1600
Setting guide

SENSITIVITY

Location
(recommended)
Shutter speed
Interference
AUTO: Automatically set with range up to 400 (1000 when using flash) according to
brightness.
'I.EXPOSURE' will not operate when set to '100'.
Scope of flash recording (P.39)
Cannot be set when 'INTELLIGENT ISO' is used (
If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (P.62).
Downloaded From camera-usermanual.com Panasonic Manuals
SENSITIVITY
→ Press 'MENU/SET' → Select 'SENSITIVITY' (P.20)
100
Bright
(outdoors)
Slow
Low
1600
Dark
Fast
High
is displayed)
VQT1P79
57