Changing Recording - Panasonic Lumix DMC-TZ5 Operating Instructions Manual

1
Applications
(Record)
Change between different LCD monitor displays, such as histograms.
In recording mode
Recording
1
information
5 5
In playback mode
Recording information
Recording
or histogram
information
100–0001 100–0001
1/9 1/9
1ST DAY 1ST DAY
1 month 10days 1 month 10days
10:00 MAR.15.2008 10:00 MAR.15.2008
Histogram
Displays distribution of brightness in picture
– e.g. if the graph peaks at the right, this means there
are several bright areas in the picture. (Guide) A peak
in the center represents correct brightness (correct
exposure) (P.43).
• Histogram from time of recording is different to histogram in playback and displayed in
orange, when recording with flash or in dark locations. Also, histogram may differ from
histograms made with image editing software.
• Histograms cannot be displayed in
PICTURE mode),
Guide lines
Reference for composition
(e.g. balance) when recording.
During playback zoom, motion picture playback, slideshow : Display on/off
During menu display, multi playback or calendar playback, 'DUAL PLAY' (DMC-TZ5 only):
Display cannot be changed.
Downloaded From camera-usermanual.com Panasonic Manuals
Changing recording information
display
1
Press to change display
No display Guide lines
1
No display
100–0001 100–0001
1/9 1/9
F3.3 1/30 F3.3 1/30
AWB AWB
10:00 MAR.15.2008 10:00 MAR.15.2008
(CLIPBOARD mode), or during playback zoom.
1,2
1
Set 'HISTOGRAM' to 'ON' to display
histogram (P.23).
2
Select guide line pattern and
recording information display on/off
with 'GUIDE LINE' setting (P.23).
• When
information and guide lines cannot be
displayed simultaneously.
(Example)
Dark←
(INTELLIGENT AUTO mode),
Judge balance
is in use, recording
→ Bright
OK
(MOTION
Judge center of subject
VQT1P79
37