Video Output - Samsung DVD-HR753 Instruction Manual

HDD & DVD RECORDER
HDD
TV Aspect
Library
3D Noise Reduction
Timer Record
HDMI Resolution
Disc Manager

Video Output

Setup
m MOVE s SELECT
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Downloaded From Disc-Player.com Samsung Manuals
Video
|
: 4:3 Letter Box
|
: Off
|
: 576P
Component : Component
RGB
r RETURN e EXIT
Yes No
Video Output
You can enjoy high quality image through RGB or Component
video connections. RGB video output is available connecting
scart jack(AV1) and component video output is available
connecting component(Y, P
can be selected at one time.
• Component
• RGB
In Component mode, you can set video output to Progressive
(P.SCAN) or Interlace, see pages 36 to 37.
When the HDMI cable (not supplied) is not connected, available video
output jacks are as follow.
Available Video Output Jack
Setting mode
Output jack P.SCAN off mode (Interlace mode) P.SCAN on mode
Component Output
(Y, P , P )
B R
R, G, B
AV1
Scart
Composite
Composite Video out
S-Video out
M

When the HDMI cable(not supplied) is connected, RGB output
does not operate. Video output is set to Component.
Progressive scan
If your TV supports Progressive Scan, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
To view 'Progressive scan mode', fi rst connect the component
cable. (See page 20)
Be sure the Component cables are connected properly.
◆
Setting up the Progressive scan
1. With the unit in Stop mode, press the P.SCAN button on the front of
the HDD & DVD RECORDER.
The message "Press [Yes] to confi rm Progressive scan mode.
Otherwise, press [No]." will appear.
Press the ◄► buttons to select Yes, and then press the OK button.
2.
3. Set your TV to Progressive input (using the TV remote control.)
English - 36
, P ) jack. Only one of these signals
B R
Component mode
(TV in progressive mode)
RGB Mode