Symbols - RIDGID R2501 Operator's Manual

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Eye Protection
Read The Operator's Manual
Wet Conditions Alert
Alternating Current
n o
No Load Speed
Class II Tool
V Volts
A Amperes
Hz Hertz
min Minutes
.../min Per Minute
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
NAME
Indicates a potential personal injury hazard.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Do not expose to rain or use in damp locations.
Type of current
Rotational speed, at no load
Double-insulated construction
Voltage
Current
Frequency (cycles per second)
Time
Revolutions, strokes, surface speed, orbits etc., per minute
5 - English
DESIGNATION/EXPLANATION