Unpacking; Accessories; Installation - Vacron VDH-NK205A Hardware Manual

C. Unpacking
1.

Accessories

★ Power cable and adaptor AC100-240V/DC12V 4.16A x 1PCS
★ HDD screws x 8pcs
★ Operation CD x 1pcs
★ Mouse x 1pcs

Unpacking

2.
When you receive the product, check first whether the packing of the
equipment has obvious damage. The protective material used for the package
during transport can cope with most of the accidental impact
Then, take out the device, remove the protective film of the digital video
recorder and check if there is any visible damage;
Finally, open the case, check the front panel data cable, power cord, power
supply fan and motherboard to see if they are connected firmly.
Front/Rare panels

The key functions of the front panel and the interfaces of the rear panel are
described in detail in the manual.
Please carefully check the plate or foil on the rear panel of the product to see
if it is the model you ordered.
Inside check

In addition to checking for visible signs of damage, be careful to check the
connections between the front panel data cable, power cord and
motherboard.
D. Installation
Steps and cautions:
1、Room temperature below 35℃
2、Reserve space for air circulation around 15 cm (6 inches)
3、Chassis installation starts from bottom to up
4、With multiple components in the chassis, take precautions to avoid
overloading to the power outlet.
AC100-240V/DC12V 4.8A x 1PCS
3
VDH-NK205A Hardware Manual