Altitude Diving; Oxygen Exposure - Suunto D6i User Manual

Hide thumbs Also See for D6i:
Table of Contents

Advertisement

10.2.3. Altitude diving

The atmospheric pressure is lower at high altitudes than at sea level. After traveling
to a higher altitude, you will have additional nitrogen in your body, compared to the
equilibrium situation at the original altitude. This "additional" nitrogen is released
gradually over time and equilibrium is restored. It is recommended that you acclimatize
to a new altitude by waiting at least three hours before making a dive.
Before high-altitude diving, the instrument must be set to the Altitude Adjustment mode
to adjust the calculations for the new altitude. The maximum partial pressures of nitro-
gen allowed by the mathematical model of the dive computer are reduced according
to the lower ambient pressure.
As a result, the allowed no-decompression-stop limits are considerably reduced.

10.3. Oxygen exposure

The oxygen exposure calculations are based on currently accepted exposure time
limit tables and principles. In addition to this, the dive computer uses several methods
to conservatively estimate the oxygen exposure. For example:
The displayed oxygen exposure calculations are raised to the next higher percent-
age value.
The CNS % limits up to1.6 bar are based on 1991 NOAA Diving Manual limits
The OTU monitoring is based on the long-term daily tolerance level and the recovery
rate is reduced.
Oxygen related information displayed by the dive computer is also designed to ensure
that all warnings and displays occur at the appropriate phases of a dive. For example,
the following information will be shown before and during a dive when the computer
is set in NITROX mode:
119

Advertisement

Table of Contents
loading

Table of Contents