Part List For Installation - Kenwood KDC-361U Instruction Manual

KDC-100Q
Wiring connection (for
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
14
)
Fuse (10 A)
White
Blue/White
White/Black
(Power control wire)
Gray
Gray/Black
Brown
Green
(Mute control wire)
Green/Black
Purple
Purple/Black
Blue
(Antenna control
wire)
Red
(Ignition wire)
Yellow
(Battery wire)
If no connections are made, do not let the wire
come out from the tab.
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation system,
refer your navigations manual.)
To the antenna control terminal in
the vehicle

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness (except for
KDC-100Q
)
KDC-100Q
(for )
(E) Extraction key