Recording Function; Recording Speed - Samsung MX-E850 User Manual

Recording Function

You can record sound of the CD, the Radio Broad-
casting or sound from the external source into the
USB storage device.
1. Connect the external USB storage device you want
to record to the USB 2 (
product.
2. Play a Disc, adjust the Radio frequency or connect
the external source to your product.
CD
• Press the MP3/CD on the main unit to select the CD
function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use t he CD selection ( [ or ] ) buttons to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button
on the main unit.
• Adjust the Radio frequency you want to record.
External Source
• Conn ect an External Component/MP3 player to your
product.
• Pres s the TUNER/AUX button to select <AUX> input.
• Pla y a song from the external device.
USB 1
• Conn ect an USB to USB 1 jack of your product.
• Pres s the USB 1 button to select USB 1.
• Pla y a song from the USB 1.
Press the USB REC button on the remote control or the
3.
USB 2 REC button on the main unit to start recording.
CD
• "TRACK RECORDING" is displayed and C D
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit
to start recording the all tracks of Disc.
"FULL CD RECORDING" is displayed.
• If you play the MP3/WMA file, the file is copied into the
USB device totally.
"CHECK FILE""COPY XX""COPY END" is dis-
played.
When the recording is done, "STOP" will be displayed.
• If there is the same file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORDING is displayed .
4. To stop recording, press the STOP (@) button and
then automatically create and save as the MP3 file.
5. To remove the USB device safely, press the STOP (@)
button once again.
After the recording, a directory
named "RECORDING"(CD), "CD COPY"(MP3 CD),
"TUNER RECORDING" or "AUX RECORDING" will be
created in your device.
• Do not disconnect the USB or the AC Cord during the
• If you disconnected USB device during the recording,
) on your
• When the USB memory is not enough, it will be displayed
• The recording works if the USB device or the HDD is
• When you use CD high speed search function, the CD
• Sometimes, the recording time may be longer with some
• In the program mode, you can't use the CD recording
• When the CD recording, the EQ and GIGA SOUND
• When the CD recording, the REPEAT function can not
• If you use the MIC function during the CD recording, the
• You can not record the radio when searching or no
• Note that setting the input level too loud when recording

Recording Speed

You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as following:
• While
recording speed does not supported.
• When you select RECORD SPD x
not be output.
• If you connected the Microphone, you just have one recording
speed mode: RECORD SPD x 1.
• During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the Microphone, it
will still stop.
recording as this may cause file damage.
the main unit will be power off and you may not delete
the recorded file, In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
"NOT ENOUGH MEMORY".
formatted in the FAT file system. (The NTFS file system is
not supported.)
recording can't work.
USB devices.
function.
functions can not work and automatically change to OFF.
work and automatically changes to OFF.
voice from the microphone will be recorded.
available frequencies in the Tuner mode.
music from an external device through the AUX and USB
channel may introduce noise into the recording. In that
case, lower the external device's volume level.
RECORD SPD x 1;RECORD SPD x 4
the Tuner or External Source is recording, the
4, the audio sound will
15 14
English English