Listening A Radio; Selecting A Stored Station; Setting The Clock - Samsung MX-E850 User Manual

Listening a Radio

You can store up to:
15 FM stations, 15 AM stations (optional).
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select
FM or AM
FUNCTION button on the remote control.
2. To sear ch for a station
Preset ................... Once or more times until PRESET
is displayed.
You can search the stored frequen-
cies in the Preset mode.
Manually .............. Once or more times until MANUAL
is displayed.
You can search the frequencies one
by one in the Manual mode.
3. Select the station to be stored by:
• Pressing the TUNING/ALBUM , or . button
on the remote control button to select the preset
station.
or
Turn the EASY SEARCHING JOG control left or
right to search the station.
• Press and hold the TUNING/ALBUM , or .
button on the remote control to automatically
search for active broadcasting stations.
4. Press the MO/ST button to switch between stereo
and mono.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM station.
5. If you do not want to store the radio station found,
revert to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store any other radio frequencies required,
repeat Steps 3 to 4.
➣
In Tuner mode
• In the Manual mode, you can use [ or ] button
on the main unit to manual search a radio station.
• In the Preset mode, you can use [ or ] button
or the EASY SEARCHING JOG control on the
main unit to search a stored radio station.
by pressing the
Press TUNING MODE button

Selecting a Stored Station

You can listen to a stored radio station as following:
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select FM or AM by pressing the FUNC-
TION button on the remote control.
2. Press the TUNING MODE button on the remote
control until "PRESET" is displayed.
3. Press [,] button on the main unit or TUNING/
ALBUM , , . on the remote control to select a
desired preset number.
or
Turn the EASY SEARCHING JOG control left or
right on the main unit to select the stored station.

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press the
ENTER button, "CLOCK" is displayed.
( )
3. Press the ENTER
(
• Increase the hours: ,
• Decrease the hours: .
4. When the correct hour is displayed, press the
ENTER button, the minutes flashes.
( )
• Increase the minutes: ,
• Decrease the minutes: .
5. When the correct minute is displayed, press the
button, " TIMER" appears in the
ENTER
( )
display.
• The current time is now set.
• You can display the time, even when you are using
another function, by pressing the TIMER SET button
once.
• You can also use ] or [ on the front panel instead
of TUNING/ALBUM , or . button in step 3,4.
button, the hour flashes.
)
13 12
English English