DESCRIPTIONS
If there is more than one file on the device you are playing, and you press
Press to select TREBLE, BASS, SUBWOOFER LEVEL or AUDIO SYNC.
Then, use the , buttons to adjust the TREBLE or BASS volume from
-3 ~ +3, SUBWOOFER LEVEL volume from -12, -6 ~ +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz, and 10KHz are selectable and each can be adjusted to a setting between
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to sync the audio with the
video. Use the , buttons to set the audio delay between
0 ms ~ 300 ms. In TV mode and BT mode, the Audio Sync function may not
● Operate the TV using the TV's remote control.
+ Controlling the Soundbar using Your TV Remote Control
1. Press and hold the
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
● This function is not available when the Soundbar is in TV ARC mode or in HDMI mode.
● Only the VOL +/- and
● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
● Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
● To turn off this function, press the
"OFF - TV REMOTE" appears on the Soundbar's display.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
Press the p button to pause a file temporarily.
Press the p button again to play the selected file.
the [ button, the previous file is selected.
SOUND button for more than 5 seconds while the Soundbar is turned on.
buttons are available to control the Soundbar.
SOUND
Power
Volume
Play / Pause
Skip Back
SOUND CONTROL
-6 ~ +6.
available.
button for 5 seconds.
10