Panasonic Shows U-26PE1U6 Technical Data & Service Manual page 68

WARNING
When connecting each power wire to the corresponding
terminal, follow the instructions on "How to connect wiring
to the terminal" and fasten the wire securely with the fixing
screw of the terminal plate.
How to Connect Wiring to the Terminal
For stranded wiring
(1) Cut the wire end with a wire cutter or wire-cutting
pliers, then strip the insulation to expose the stranded
1
wiring about 3/8 in. (Fig. 1-1)
(2) Using a Phillips head screwdriver, remove the terminal
screw(s) on the terminal plate.
(3) Using a ring connector fastener or pliers, securely
clamp each stripped wire end with a ring pressure
terminal. (Fig. 1-1)
(4) Place the ring pressure terminal, and replace
and tighten the removed terminal screw using a
screwdriver. (Fig. 1-2)
Loose wiring may cause the
terminal to overheat or result
in unit malfunction. A fire
hazard may also exist.
Therefore, ensure that all
wiring is tightly connected.
Stranded wire
Special
Screw
washer
Ring pressure
terminal
Terminal plate
Wire
1-62
1. Specifications
Ring
pressure
terminal
Fig. 1-1
Screw and
Special washer
Ring
pressure
terminal
Wire
Fig. 1-2