Optoma HD81 User Manual page 28

User Controls
28
Downloaded From projector-manual.com Optoma Manuals
Overscan Mask off a few pixels on each edge of the
image to be displayed. Use this function
to adjust if image source happens to have
noise near any edge of the display image.
16x9/4x3/Na- Select the display format. Refer to "Display-
-> Format" section on page 35.
tive/LBX/For-
mat 1/Format 2
HDMI 1/
Press "HDMI 1"/"HDMI 2"/"HDMI 3"
to choose source from HDMI 1/HDMI
HDMI 2/
2/HDMI 3 connector.
HDMI 3
S-Video 1/ Press "S-Video 1"/"S-Video 2"/"S-Video 3"
to choose source from S-Video 1/S-Video
S-Video 2/
2/S-Video 3 connector.
S-Video 3
CVBS 1/ Press "CVBS 1"/"CVBS 2"/"CVBS 3" to
choose source from CVBS 1/CVBS 2/CVBS
CVBS 2/
3 connector.
CVBS 3
YPbPr 1/
Press "YPbPr 1"/"YPbPr 2" to choose
YPbPr 2 source from YPbPr 1/YPbPr 2 connector.
VGA Press "VGA" to choose source from VGA
connector.
BNC 1/BNC 2 Press "BNC 1"/"BNC 2" to choose source
from BNC 1/BNC 2 connector.
Auto
Automatically synchronizes the projector to
the input source.