For Windows Xp Users; Mounting Your Camera - Sanyo VPC-HD1AEX Instruction Manual

For Windows XP users

Mounting your camera

1 Set the camera to the card reader mode (page 11).
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [XACTI HD1A
(E:)] window opens.
* The drive name (E:) may be different on your computer.
2 Select an action.
h Select the desired procedure from the [XACTI HD1A (E:)] window.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on the icon for safely removing hardware.
h A list appears showing the devices connected to the computer's USB
connector.
2 Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.
Downloaded From VideoCamera-Manual.com Manuals
13
English