Sanyo VPC-HD1AEX Instruction Manual page 199

SPECIFICATIONS
Shutter speed
Sensitivity
Minimum subject
illumination
Image stabilizer
Monitor
Flash working
range
Flash modes
Focus
Self-timer
Downloaded From VideoCamera-Manual.com Manuals
185
English
Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots mode:
1/15 to 1/2,000 second (no flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is
set to lamp mode Q)
Still image shooting mode:
Auto (equivalent to ISO 50 to 200)/equivalent to
ISO 50, ISO 100, ISO 200, and ISO 400
(switchable from Shooting Setting Screen)
Video clip recording mode:
Auto (equivalent to ISO 200 to 800)/equivalent to
ISO 200, ISO 400, ISO 800 and ISO 1,600
(switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 1,600
equivalent when Scene Select function is set to
Q
27 lux (HD mode/normal mode, 30 fps, 1/30 sec in
AUTO mode)
14 lux (HD mode/normal mode, 30 fps, 1/30 sec at
ISO400, or 1/15 sec in lamp mode)
Electronic (video clip recording mode only)
Amorphous silicon TFT color liquid crystal
(transmissive)
150,000 pixels (frame coverage: approx. 100%)
GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Auto-flash, forced flash, flash off, red-eye reduction
TTL-type AF (still image shooting mode: 5-point
range finder/spot focus; video clip recording mode:
Continuous focus), manual focus (22 steps)
Approx. 2-second delay, 10-second delay