Safety And Instructional Decals - Toro 22188TE Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Fast
2. Continuous variable setting
3. Slow
1. Warning—wear hearing protection.
4. Engine—stop
5. Press the primer button 3
times, pull the cord to start
the engine, then move the
throttle to the Fast position.
6. Release the bail to
disengage the cutting
blade.
98-4387
1. Read the Operator's Manual for information on greasing the
traction drive every 25 operating hours and greasing the
transmission every 100 operating hours.
98-2006
7. Move the bail up to engage
the cutting blade.
8. Move the bail to the handle
to engage the traction drive.
9. Forward speeds
6
93-6664
10. Neutral