1
2
010913
At this time, make sure that the locking lever fits in the
groove in the undercover.
CAUTION:
Never use the tool without installing the undercover
•
on it.
Remove the blade cover and then turn on the tool to
check it for proper movement.
NOTE:
When the shear blades does not operate properly,
•
there is a poor fit between the blades and crank.
Redo from the beginning.
Removing the hedge shear blades
1
010890
CAUTION:
Install the blade cover before removing or installing
•
the shear blades.
Reverse the tool.
1
4
010891
To remove the shear blades, press the locking lever and
with the locking lever pressed turn the undercover
counterclockwise until the symbol
is aligned with the symbol
1. Groove in the
undercover
2. Locking lever
1. Blade cover
1. Undercover
2
2. Locking lever
3. Press
3
4. Turn
on the undercover
on the locking lever.
1
010892
Take out the undercover from the tool.
010893
Loosen two screws with a coin and similars and remove
the shear blades.
NOTE:
Do not remove the screws. Without removing the
•
screws loosened, shear blades can be removed.
1
010894
Remove the crank from the shear blades.
NOTE:
The crank may remain in the tool.
•
1
011045
NOTE:
In the 2-way usage, the removed grass shear
•
blades need to be sheared in the blade storage
case and stored for future use.
16
1. Undercover
1. Screws
1
1. Crank
2. Shear blades
2
1. Grass shear
blade cover
2
2. Grass shear
blade
3. Storage case
3