Siemens TE515 Instruction Manual page 21

Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue� Such residue can
cause corrosion� New sponge cloths may
contain salts. Salts can cause rust film
on stainless steel and must therefore be
washed out thoroughly before use�
Cleaning
Duration: approx� 10 minutes�
If the message Clean required! appears
on the display, press the k off / i button
(13) for 3 seconds and then press the start
button (10)�
The cleaning programme will start�
To clean the appliance before being
prompted, press the k off / i button (13) for
at least 3 seconds� Then press the k off / i
button (13) briefly twice. Turn the upper
rotary knob (15) until Start cleaning appears
in the display� To start the cleaning proce-
dure, press the start button (10)� The display
will guide you through the programme�
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them�
Open drawer
● Open the drawer (4)�
Fill cleaner
Press start
● Drop a Siemens cleaning tablet in the
drawer (4) and close�
● Press the start button (10)�
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes�
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them�
The appliance has finished cleaning is
ready for use again�
Calc'n'Clean
Duration: approx� 35 minutes�
Calc'n'Clean combines the separate func-
tions of descaling and cleaning� If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme�
Important: If there is a filter in the water
tank (17), it needs to be removed before the
service programme is run�
If the message Calc'n'Clean required!
appears on the display, press the k off / i
button (13) for 3 seconds and then
press the start button (10)� The service
programme will start�
To run Calc'n'Clean before being prompted,
press the k off / i button (13) for at least
3 seconds� Then press the k off / i button
(13) briefly twice. Turn the upper rotary
knob (15) until Start Calc'n'Clean appears
in the display� To start Calc'n'Clean, press
the start button (10)�
The display will guide you through the
programme�
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them�
Open drawer
● Open the drawer (4)�
Fill cleaner
Press start
● Drop a Siemens cleaning tablet in the
drawer (4) and close�
● Press the start button (10)�
N.B.: If the water filter is activated, the display
will prompt you to remove the filter and then
press the start button (10) again� Remove the
filter now if you have not already done so.
Press the start button (10)�
en
17