Bosch PBS 75 AE Original Instructions Manual page 12

OBJ_BUCH-1634-003.book Page 12 Thursday, August 1, 2013 9:16 AM
12 | English
 Pay attention that no persons are put at risk through
sparking. Remove any combustible materials in the vi-
cinity. Sparking occurs when sanding metal materials.
 Do not use worn, torn or heavily clogged sanding belts.
Damaged sanding belts can tear apart, be thrown from the
machine and injure somebody.
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 Regularly clean the power tool's air vents. The motor's
fan will draw the dust inside the housing and excessive ac-
cumulation of powdered metal may cause electrical haz-
ards.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Technical Data
Belt Sander
Article number
Rated power input
No-load belt speed
Sanding belt length
Sanding belt width
Belt speed preselection
Connection for internal/external dust extraction
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 619 X08 682 | (1.8.13)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding–with high removal
capacity–of wood, plastic, metal, filler as well as varnished
surfaces.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Auxiliary handle (insulated gripping surface)
2 Sanding belt*
3 Clamping lever for sanding belt
4 Thumbwheel for belt speed preselection
(PBS 75 AE)
5 On/Off switch
6 Dust box, complete (Microfilter System)
7 Lock-on button for On/Off switch
8 Handle (insulated gripping surface)
9 Extraction adapter
10 Extraction outlet
11 Latching lever for dust box
12 Filter element (Microfilter System)
13 Adjustment screw for belt run
14 Protection cover
15 Dust passage
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PBS 75 A
3 603 BA1 0..
W
m/min
mm
mm
kg
PBS 75 AE
3 603 BA1 1..
710 750
350 200 – 350
533 533
75 75

–
 
3.4 3.5
/II /II
Bosch Power Tools