Care and maintenance
Your camera is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you to fulfil any warranty
obligations and to enjoy this product for many years.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the batteries and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts can be
damaged.
• Do not leave the device in direct sunlight or other bright lights. Its internal
components or display can be damaged.
• Do not store the camera in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the camera in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use a soft, clean, dry cloth to clean any lenses.
If your device is not working properly, take it to your nearest authorized service
facility for service. Only qualified personnel may install or repair this device.
C a r e a n d m a i n t e n a n c e
12