Selecting Base - TIPTEL easyDECT 3300 Operating Instructions Manual

5. Hold down the Paging key on the rear of the base
unit for more than 3 seconds until you see the hand-
set flashing, then release the key.
6. When the handset lamp blinks, press the SELECT
soft key on the handset. The display asks you to
enter the base PIN code (preset to 0000) which acts
as phone's authentication code (AC).
7. Enter the said code, then press the SELECT soft key
on the handset. If the registration has performed
successfully, the new handset will show the phone
and base numbers (e.g. HS(2) BS(1)) and returns in
Standby mode.

8.4 Selecting Base

Your handset can be used with up to four base units,
provided that it has been previously registered with
them as per the par. 8.3. This menu option allows
you to select the base you want to use:
1. Press the MENU soft key to display the Main menu
items.
2. Press the navigation keys
to choose HS Settings, then press the SELECT soft
key.
3. Press repeatedly the
6:Select Base, then press the SELECT soft key.
repeatedly
or key to choose
✍
At step 4, if a check symbol appears at the right side of
the base number, it indicates that the base number is
already registered on your handset. Use another one.
4. Press repeatedly the
base you want (the current base appears with the
check symbol on the right), then press the SELECT
soft key
5. Press the key to return to Standby mode.
✍ At step 4 you can also select Best Base. In this case the
handset will automatically find the first available base
unit when you lose contact while moving around.
or key to select the
H S
ANDSET ETTINGS
UK
37