Shark S2901EU Owner's Manual page 157

USING THE GROUT SCRUBBER
Cleaning Tip: The Grout Scrubber is designed for
removing stubborn messes in hard-to-reach nooks,
corners and in grout where focused scrubbing power
may be needed. It can loosen and dislodge compact dirt
often found in corners and tight places where traditional
methods and cleaning tools tend to push dirt into,
making it difficult to reach and clean. Scrub with the
Grout Scrubber and wipe clean with a cleaning cloth.
1
Attach the Grout Scrubber by snapping into the handle
of the Accessory Hose until it clicks into place.
(fig. 14)
2
Press the power button to start steaming.
3
To remove the Grout Scrubber, press and hold
down the Accessory release button. Then slide out
the tool out.
CAUTION: Turn the unit off before attaching or
removing the Grout Scrubber.
fig. 14
USING THE WINDOW SQUEEGEE
Cleaning Tip: To use the window squeegee, work with
the vapor jet down using top to bottom movements. To do
this without leaving streaks, use lateral movements from
the top to the bottom of the surface.
CAUTION: Always avoid any sudden changes
in temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into the
handle of the Accessory Hose until it clicks into
place. (fig. 15)
2
Press the power button to start steaming.
3
To remove the Window Squeegee, press and hold
down the Accessory release button. Then slide out
the Window Squeegee.
CAUTION: Turn the unit off before attaching or
removing the Window Squeegee.
fig. 15
www.sharkclean.eu 157