Using Voice Commands To Operate Your Radio - Nokia PM-6225 User Manual

Using Voice Commands to Operate Your Radio

You can create voice commands that operate your radio when you
speak them.
To create voice commands:
1. From the standby mode, press Menu, scroll to Settings, and
press Select.
2. Scroll to Voice commands, press Select, scroll to Radio, and
press Select.
3. Scroll to Radio on, Radio off, Next channel, or Previous channel,
depending on the command that you want to create, then
press Options.
4. Scroll to Add command and press Select.
5. Press Start and speak your command after the tone
.
Tip: You could say "Next station" or other words when creating a voice
command for Next channel. The phone does not understand the words,
it only remembers the sounds. The same is also true for other commands.
6.
To review, change, or delete the voice command, press
Options, scroll to select the action, and press Select.
To use voice commands:
Note: To use voice commands to operate the radio, the radio must be on and
the phone in the standby mode.
1.
From the standby mode, press and hold the
seconds. (The key is below Contacts).
2.
Speak your command after the beep. (If a voice match is found,
the phone executes the command.)
Section 2K: Additional Features
key for two
119