Using Voice-Activated Dialing; Assigning A Voice Tag To A Phone Number - Nokia PM-6225 User Manual

Pcs vision picture phone
Table of Contents

Advertisement

Using Voice-Activated Dialing

In addition to PCS Voice Command
voice dial tag to automatically dial a phone number in your Phone
Book. (A voice dial tag is a command you record and use to place
calls without using the keypad.) Your phone can store up to
25 voice dial tags. (To create a voice dial tag, see "Adding a New
Phone Book Entry" on page 78 or "Editing a Phone Book Entry's
Phone Number" on page 81.)
Voice tags are sensitive to background noise. Record them and make
calls in a quiet environment. When recording a voice tag or making a
call by saying a voice tag, hold the phone in the normal position
near your ear. Very short names are not accepted. Use long names
and avoid similar names for different numbers.
Note:
You must say a voice command exactly as you did when you recorded it. This
may be difficult in, for example, a noisy environment or during an emergency.
You should not rely solely upon voice dialing in all circumstances.

Assigning a Voice Tag to a Phone Number

To use voice-activated dialing, you must first assign a voice
command (voice tag) to the number you wish to call.
To assign a voice tag to a phone number:
1.
Press the down scroll key
2.
Scroll to the contact to which you wish to assign a voice
command and press Details. (The phone number associated
with this contact is displayed.)
3.
Press Options, scroll to Add voice tag, and press Select.
4.
Press Start and speak the command clearly, as though you were
speaking normally into the phone (for example, "Call Bill").
(The voice command icon
5.
Press Options to assign other features to this contact, or press
Note:
Be sure to record your voice comands in a quiet environment and without the
aid of accessories (hands-free device) to avoid capturing unwanted sounds.
Unwanted sounds may cause your phone not to recognize your command
when you attempt to use voice dialing.
Section 2I: Using Your Phone's Voice Services
to return to the standby mode.
SM
(see page 177), you can use a
to display your Contacts list.
is displayed.)
99

Advertisement

Table of Contents
loading

Table of Contents