Table of Contents
Advertisement
Selecting Radio Stations
You can use the automatic tuning feature to scan for available local
stations, you can program specific stations into your radio, or you
can change stations using voice commands.
To use Automatic tuning:
1.
From the standby mode, press Menu, scroll to Radio, and
press Select.
2.
Press Options, scroll to Automatic tuning, and press Select.
3.
Press
to find stations and stop when the next station is found.)
To program radio station presets:
You can program 20 stations into your radio, then scroll through
them to select one for listening.
1.
From the standby mode, press Menu, scroll to Radio, and
press Select.
2.
Press Options, scroll to Manual tuning, and press Select.
3.
Press
press OK.
4.
Press Options, scroll to Save channel, press Select, enter a name
for the channel, and press OK.
5.
Scroll to a channel position and press Select to assign the
channel to this location.
6.
To program more channels, repeat Steps 1–5 until finished
with your programming.
Once programmed, a channel can be deleted or renamed.
Section 2K: Additional Features
or
. (The radio will scan up or down in frequency
or
to select the frequency of a radio station and
120
Advertisement
Table of Contents
