Server Profile Settings - Nokia NSERIES N73 User Manual

The downloading of software updates may involve the
transfer of large amounts of data. Contact your service
provider for information on charges for data
transmissions.
Ensure that the battery of your device has enough power
or connect the charger before you start the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to backup data before accepting
the installation of an update.
When the download is complete, select
Accept to install the update, or
using Options >Install
take several minutes.
The device updates the software and restarts. To
complete the update, select OK. When asked, select an
internet access point. Your device sends the software
update status to the server.
To view the server profile settings used for software
updates, select Options
Server profiles
Press , and select
. You may receive server profiles and different
100
Yes and then
No to install it later by
update. The installation may
>Settings.
Tools > Device mgr., and press
configuration settings from your service providers, or
company information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select
Start configuration.
To create a new server profile, select
server profile. To edit a server profile, select
Edit profile.

Server profile settings

Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
Options >
Options > New
Options >