Access Points - Nokia NSERIES N73 User Manual

Access points

You may receive access point settings in a message from
a service provider. See 'Data and settings', p. 63. Some or
all access points may be preset for your device by your
service provider, and you may not be able to change,
create, edit, or remove them.
access point, and
To create a new access point, select
access point. Select
default access point settings, or
select an existing access point as the basis for the new
access point.
To edit the settings of an access point, select
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
be left empty, unless you have been instructed otherwise
by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
118
indicates a protected
indicates a packet data access point.
Options
Use default settings to use the
Use existing settings
or with a red asterisk. Other fields can
Packet data
Follow the instructions from your service provider.
Access point
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
> New
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
to
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select
Options >
Homepage—Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
Select Options
following settings:
Network type—Select the Internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address
your device.
DNS address—In
address of the primary DNS server. In
name—You obtain the access point name
Normal or Secure.
> Advanced settings to change the
(for IPv4 only)—Enter the IP address of
Primary DNS address, enter the IP
Secondary DNS