Fitting Your Child In The Stokke® Izi Sleep™ By Besafe - Stokke iZi Sleep User Manual

112
Fitting your child
in the Stokke® iZi Sleep™ by BeSafe®
21
22
3
4
5
Position of harness (3)
Too high
Adjusting the harness (3):
Open the storage compartment
(22) on the back of the car seat.
Detach the harness adjuster (21),
and place it in the correct posi-
tion by supporting the strap from
the inside. Make sure adjuster is
clicked in.
Lay the harness (3) over the sides
of the Stokke® iZi Sleep™ by Be-
Safe®, before your child is seated.
Put the child in the seat and place
the harness over the shoulder and
close the harness buckle (4). Pull
the central adjuster (5). Just two
fingers should fit between child
and harness. The harness shall not
be twisted.
When the child weighs over 13kg
or the child's head grows above
the seat, the child shall change to
a group 1 seat, for instance the iZi
Sleep™ by BeSafe®.
Too low Correct