Pair Devices - Nokia E63-1 User Manual

asked if you want to accept the message in which the
data is included. If you accept, the message is placed
in the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
service (for example, a laptop computer).
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia PC Suite and
some enhancements such as headsets may maintain a
connection even if not actively used.

Pair devices

Open the paired devices tab.
Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to
use the same code. Devices that do not have a user
interface have a fixed passcode. You need the passcode
only when you connect the devices for the first time.
After pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
digits.
1. Select Options
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth before, a list
of the previous search results is displayed. To search
104
for more Bluetooth devices, select
New paired device. The device
>
More
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes
device and the other device automatic, or
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
Options
>
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and
pairings, select
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or computer,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select
unauthorised.
To use a Bluetooth audio enhancement such as a
Bluetooth handsfree or headset, you need to pair your
device with the enhancement. See the enhancement
user guide for the passcode and further instructions.
devices. To connect to the audio enhancement, switch on the
enhancement. Some audio enhancements connect
to make the connection between your
Assign short name. The nickname is only
Options > Delete. To delete all
Options Delete all. If you are
>
Set as authorised. Connections
Set as
No to