Travel Guides; Gps Data; Use Gps Data - Nokia E63-1 User Manual

Travel guides

Travel guides provide information about attractions,
restaurants, hotels, and other points of interest. Some
guides contain videos and audio clips. The guides must
be purchased and downloaded before use.
Downloading travel guides may involve the
transmission of large amounts of data through your
service provider's network. Contact your service
provider for information about data transmission
charges.
To purchase and download travel guides, or to view
downloaded ones, select
Guides.
To browse travel guide categories, select a category,
and press the scroll key. If there are subcategories,
select a subcategory, and press the scroll key again.
To download a new guide to your device, scroll to the
desired guide, and select Yes. You can pay for the
guides through a credit card or in your phone bill, if
supported by your service provider.

GPS data

Select Menu Tools
>
With GPS data, you can view your current location, find
your way to a desired location, and track distance.
Select Navigation
your trip destination,
information about your current location, or
78
distance to view your travelling information such as
Options Extras
>
GPS data.
>
to view navigating information to
Position to view positioning
the distance and duration you have travelled, and your
average and maximum speeds.
The application must receive positioning information
from at least three satellites to be used as a travelling
aid.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.

Use GPS data

To check the signal strength of the satellites that
>
provide the positioning information necessary for
navigation, open any of the three views and select
Options
>
To set a landmark or location as the destination of your
trip, select Navigation
destination. You can also enter the destination
latitude and longitude coordinates.
To remove the destination set for your trip, select
Navigation
To save your current position as a landmark, select
Navigation
position.
To activate the trip meter, select
Options > Start. To stop the trip meter, select
Options > Stop.
To reset all fields and start calculating the trip again,
select Trip distance
Trip
Satellite status.
Options
> >
Options Stop navigation.
> >
or Position, and Options
Trip distance
Options > Restart.
>
Set
Save
>
>