Table of Contents
Advertisement
PROBLEM
MODULES ARE
PROPERLY
ARE N~
I
PROPERLY
MEATS
POSSIBLE CAUSE AND REMEDY
be
in the main distribution
y
circuit fise, a tiipped circuit breaker, the main fuse or the main circuit breaker,
If the control box uses fuses, tie circuit fuse (a cartridge-type) should be changed
BUT ONLY BY SOMEONE FAMILWR WITH ELE~RICAL CIRCUITS. If,
again, call for service.
management to perform this pheck before calling for service.
* Controls are not properly set or wrong control is set for the module or element you
are using,
heat—switch the module to the other side of cOOktOp. If it
operates on that side, then switch may beat fault. If it does not heat, indications are
controls on the side of cooktop where grill module is placed.
* Griddle was not pre-seasoned before first use. Surface of grill or griddle was not
greased before cooking.
* Ven$ h~~ not turn~ on,
. Some smoke and odor is normal when using so~d disk elements for the first time and
surface unit control set for unit
grate are causing excess smoke.
28
Advertisement
Table of Contents
