First Step - Kenwood DPX504U Quick Start Manual

First step

[VOL]
[ 4 ]/[ ¢ ]
Canceling the Demonstration
Mode
Cancel the demonstration mode
when you use it for the first time after
installation.
1
Press the [VOL] knob to cancel the
demonstration mode when the
messages "To cancel DEMO press the
volume knob"/ "CANCEL DEMO PRESS
VOLUME KNOB" are displayed (approx.
15 seconds).
2
Turn the [VOL] knob to select "YES", and
then press the [VOL] knob.
The demonstration mode can also be
canceled in the Function setting mode.
Refer to <Demonstration mode Setting>
(page 45) of Instruction manual.
4 | Quick Start Guide
DPX504U
Adjusting the Date
1
Press the [VOL] knob to enter the
Function setting mode.
2
The item can be selected and
determined as follows.
"Settings" "Clock & Date"
➜
Adjust"
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3
Press [4] or [¢] button to select
month, date, or year to set.
4
Turn the [VOL] knob to adjust the year,
month, and date.
5
Press the [VOL] knob to finish the date
adjusting.
6
Turn the [VOL] knob to select "Date
Mode", and then press the [VOL] knob.
7
Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
8
Press the [ ] knob for at least 1
second, and then press it again briefly to
exit the Function setting mode.
[ ]
"Date
➜