Access Points - Nokia N81-3 User Manual

Access points

You may receive access point settings in a message from a
service provider. See 'Data and settings', p. 37. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them. indicates a protected access point.
indicates a packet data access point, and
wireless LAN access point.
Tip! You can create internet access points in a
wireless LAN with the WLAN wizard. See 'WLAN
wizard', p. 71.
To create a new access point, select
point.
To edit the settings of an access point, select
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Follow the instructions from your service provider.
Access point
a from your service provider.
User
connection, and is usually provided by the service provider.
Prompt
time you log in to a server, or if you do not want to save
Options > New access your password in the device, select Yes.
Password—A password may be needed to make a data
Options > connection, and is usually provided by the service provider.
Authentication—Select
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
Select
following settings:
Network
IPv4
network type.
name—You obtain the access point name
name—The user name may be needed to make a data
password—If you must enter the password every
Normal
Options > Advanced settings
type—Select the internet protocol type to use:
or IPv6. The other settings depend on the selected
or Secure.
to change the
121