Advertisement
--
me
oven $(XM'can i%? KwYN3ved
f or
fc$eanhge
To remove:
"A#ss%h
.- ~=#SS%h
Open the door@ the broil stop position
(see
illustration).
. Grasp the door at each side am.flift up and off the hinges.
E: When the door Is removed and Mnge arms are at
slop position, do not bump or try to move the hinge
arms. The hinges could snap back causing an lnjw-yto
the hands or damage to the porcelain on the front of the
range. Cover the hinges with towelhqj or ernp{ytowel
rolls while working in the oven area.
To replace:
1. f-foldthe door over the hinges wilh the slots at the bottom
edge of the door lined up with the hinges. The hinge arms
must still be in Ihe stop position.
2. Slide the cfoorcfownonto the hinges as far as it will go and
close the door.
~-
Becareful not to scratch the oven finish when ilnstal!ing
or removing oven racks.
TO install:
1.
Set the
raised back edge of the rack on a pair of rack
.- - -
guides.
<-- Push the rack in until you reach the bump in the rack
.
uide, then lift the front of the rack a bit and push the rack
I the way in.
To remove:
1.
Pull
the oven rack out, then up,
THE OW3+J
Do not touch oven bulb when hot, with wet IwKfs, or
vidpe own light area with wet clolh.
Electrical pm.fver m ust be shut
off
Myou have to .repkice
a Ibf'o!wm
bulb.
GLASS –
I.
Remove
the
three screws and lift off the glass retainer,
B.r
SC%!N
GLASS
glass cover and gasket.
w
COVER
2.
Replace
thebulb with a 40 watt appliance bulb.
3.
Replace the gasket,
glass cover and glass
~{e~ainer. Tighten screws securely.
)
-", ! ,,
3
19
ENMW-21
Advertisement
