Packet Data; Monitor All Communication Events - Nokia N72 User Manual

Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See "Security",
"Phone and SIM", p. 90.

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
Options > Clear
, and select My own >
Copyright © 2006 Nokia. All rights reserved.
To monitor all voice and video
calls, text messages, or data
connections registered by the
device, press , select My
own > Log, and press the scroll
key to the right to open the
general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the general log to view just one type
of event and create new contact cards based on the log
information.
Tip! If you want to see the duration of a voice call on
the main display during an active call, select
> Settings > Show call duration
Tip! To view a list of sent messages, press
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown as
packet data connections.
To filter the log, select Options
Options
> Yes.
, and
> Filter and a filter.
15