1. Introduction
The purpose of this manual is to provide dealers and/or distributors with the product
information and instructions that are required for servicing the
2. Service Guide
The
S237 scooter
Seat Assembly
Battery Pack Assembly
Rear Section Assembly
Front Section Assembly
Tiller Assembly
2.1
How to replace or repair the
The seat assembly includes the seat body and the seat base plate assembly.
2.1.1 To replace the seat body
◆ When to replace the seat body?
◇ The seat body is worn out, pierced, scratched, or out of shape.
◆ How to replace the seat body?
◇ Please proceeding following steps.
1. Push down the seat free bar
from the frame and pull it out.
2. Use hex tools to loosen four screws
remove the seat body (4.01).
2.1.2 To replace the armrest assembly
When to replace the armrest assembly?
◇ The armrest is worn out, pierced, scratched, or out of shape.
◆ How to replace the armrest assembly?
◇ Please proceeding following steps.
1. Use hex. tools to loosen the screws
assembly
2. Use screwdriver to loosen the screw
armrest
consists of five main parts:
[See Illus. 01]
(4.08)
(4.F)
out.
(4.72)
from armrest support plate.
S237
Seat Assembly
to release the seat assembly
(4.03)
on seat base plate
[See Illus. 02]
(4.05)
and then take the armrest
(4.73)
under armrest to disassemble
1
scooter.
(4.1)
(4.02)
and