RECARO Performance RIDE Instruction Manual page 41

10. To remove the LATCH connectors from the vehicle, first
loosen the adjuster by pressing the adjuster button and
lengthening the strap (see figure 3). Press the red buttons
on the LATCH connectors and remove from the vehicle
lower anchors.
11. To remove the top tether, press the release button on the
tether adjuster and pull the restraint forward to loosen. It
may be necessary to press the top of the child restraint
into the vehicle seat back to depress the release button on
the tether adjuster. Unhook the top tether hook from the
vehicle anchor.
12. Fold the top tether strap and place it in the storage pouch
when not in use. Place the LATCH connectors in their
storage locations when not in use.
37