Well WRC5020N User Manual page 74

WELL WRC5020N User's Manual
To configure security, choose one of the following options:
•
If you do not want to use Wireless Network security, From
the Encryption drop-down list, select None setting and then
click Finished. None is the default setting, but you are
strongly recommended to use wireless network security
on your device.
•
If you want to use WEP 64bit ASCII (5 characters) data
encryption, follow the instructions in Configuring 64bit ASCII
(5 characters) encryption.
•
If you want to use WEP 64bit Hex (10 characters) data
encryption, follow the instructions in Configuring WEP 64bit
Hex (10 characters) security.
•
If you want to use WEP 128bit ASCII (5 characters) data
encryption, follow the instructions in Configuring WEP
128bit ASCII (5 characters) security.
•
If you want to use WEP 128bit Hex (10 characters) data
encryption, follow the instructions in Configuring WEP
128bit Hex (10 characters) security.
•
If you want to use WPA (AES) - Wi-Fi Protected Access
(AES) Passphrase encryption, follow the instructions in
Configuring WPA (AES) Passphrase security.
•
If you want to use WPA (AES) - Wi-Fi Protected Access
(AES) HEX (64 characters) encryption, follow the
instructions in Configuring WPA2 (AES) HEX (64
characters) security.
•
If you want to use WPA2 (AES) - Wi-Fi Protected Access 2
(AES) Passphrase encryption, follow the instructions in
Configuring WPA2 (AES) Passphrase security.
•
If you want to use WPA2 (AES) - Wi-Fi Protected Access 2
(AES) HEX (64 characters) encryption, follow the
instructions in Configuring WPA2 (AES) HEX (64
characters) security.
•
If you want to use WPA2 Mixed- Wi-Fi Protected Access 2
(Mixed) Passphrase encryption, follow the instructions in
Configuring WPA2 (Mixed) Passphrase security.
•
If you want to use WPA2 Mixed- Wi-Fi Protected Access 2
(Mixed) HEX (64 characters) encryption, follow the
instructions in Configuring WPA2 (Mixed) HEX (64
characters) security.
74