Well WRC5020N User Manual page 154

WELL WRC5020N User's Manual
Option
Static IP
WAN
Access
DHCP Client
Type
PPPoE
PPTP
L2TP
Host Name
IP Address
Subnet Mask
Default Gateway
User Name
Password
Service Name
Continuous
Connection
Connect on
Type
Demand
Manual
Idle Time
WAN Physical
MTU Size
Attain DNS Automatically
DNS 1 (Primary DNS Server)
DNS 2 (Secondary DNS Server)
DNS 3 (Third DNS Server)
Choose this option if you are a leased line user with a
fixed IP address.
Choose this option if you are connected to the Internet
through a Cable modem line.
Choose this option if you are connected to the Internet
through a DSL line
Choose this option if you are connected to the PPTP
Server
Choose this option if you are connected to the L2TP
Server
The name of the DHCP host
Check with your ISP provider
Check with your ISP provider
Check with your ISP provider
User name for PPPoE registration recognized by the
Internet service provider
Password for PPPoE registration recognized by the
Internet service provider
Service Name for PPPoE registration recognized by the
Internet service provider
The connection is always on
Enter the minutes after which the session must be
disconnected, if no activity takes place
Manually connect
Enter the minutes after which the session must be
disconnected
Dynamic IP or Static IP for PPP Connection
Specify the network MTU rate
Obtain DNS server address automatically
Check with your ISP provider
Check with your ISP provider
Check with your ISP provider
Description
154