Introduction; Intended Use; Serial Number; Specifications - Frontier wc1105 Operator's Manual

INTRODUCTION

Intended Use

Frontier Chippers are designed to chip natural, untreated wood only. Materials that are processed
may contain chemicals or by-products that could corrode the machine, damage the blades, or spon-
taneously combust. Frontier Equipment will not cover under warranty any chipper that has been used
for anything besides natural wood.

Serial Number

The chipper's serial number is located on the inside of the base. This number helps us to track
changes and improvements and must be mentioned when ordering parts or requesting service. For
your convenience, a space has been provided inside the front cover of this manual to record the se-
rial number, model number, purchase date, and dealer name.

Specifications

Specifications
Chip Opening
Drive System
Engine
Transport
HP Required
Rotor Size
Knives
Knife Bolts
Feed System
Hydraulic Requirement
Feed Roller
Hopper Opening
Feed Height
Weight (lbs.)
WC1103
3 x 5.5 in. (7.5 x 14cm)
PTO
N/A
3 Point Hitch
16
65 lbs.
(2) 2.5 x 3.25 x 5/16 in.
3/8" Recessed Head Hardened Bolts
Manual
25 x 18 in. (62.5 x 45cm)
38" (95cm)
375
3
WC1105
5.5 x 8 in. (14 x 20cm)
3 Point Hitch
(4) 2.5 x 3.25 x 5/16 in.
N/A
N/A
28 x 28 in. (70 x 70cm)
41" (102.5cm)
650
WC1205
PTO
N/A
35+
165 lbs.
Hydraulic
6 GPM
15" (37.5cm)
21" (52.5cm)
775