Installing The Gps Aerial; Installation Notes; Parts Supplied - Pioneer AVIC-F940BT Installation Manual

Navigation av system
Hide thumbs Also See for AVIC-F940BT:
Table of Contents

Advertisement

Available languages

Available languages

Installation

Installing the GPS aerial

CAUTION
Do not cut the GPS aerial lead to shorten it
or use an extension to make it longer. Alter-
ing the aerial cable could result in a short cir-
cuit or malfunction and permanent damage
to the navigation system.

Installation notes

! The aerial should be installed on a level sur-
face where radio waves will be blocked as
little as possible. Radio waves cannot be re-
ceived by the aerial if reception from the sa-
tellite is blocked.
Dashboard
! When installing the GPS aerial inside the
vehicle, be sure to use the metal sheet pro-
vided with your system. If this is not used,
the reception sensitivity will be poor.
! Do not cut the accessory metal sheet. This
would reduce the sensitivity of the GPS aer-
ial.
! Take care not to pull the aerial lead when
removing the GPS aerial. The magnet at-
tached to the aerial is very powerful, and
the lead may become detached.
! Do not paint the GPS aerial, as this may af-
fect its performance.

Parts supplied

Rear shelf
GPS aerial
Section
03
Metal sheet
25
Engb

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents