Page 1
Alternative arrangements should be made for access to emergency services. This product is intended for registration to the BT Synergy 3100 or 3500 base station. It may also be registered to other DECT GAP compatible bases, with possible limited availability of some functions.
Page 2
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Please open this page for an ‘at a glance’ guide to your Synergy 3000...
Page 3
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 At a glance Handset Volume buttons Red light Use to adjust the handset To indicate that the phone is earpiece speech volume and ringing or in use.
Page 4
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Charger Charging light Lights up red to indicate charging when the handset is on the charger. Synergy 3000 Explanation of Charging the display icons Standby screen...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Quick Guide Information for the handset settings Function Key combination Answer a call/End a call Make a call Redial a number Store a number in the...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Menu Structure Phonebook Delete Modifiy Setup Base Vol Handset 1..5 Vol Off Base Mel Melody 1..5 Sel Base Base 1..4 Auto Del H/S PIN? Handset 1..5...
Page 7
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Handset Beep Keytone On or Off Low Batt On or Off Outrange On or Off Ring Vol Volume 1..5 Vol Off Ear Vol Ear Vol 1..5 Int Mel Melody 1..5...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 In this guide Note There is a detailed INDEX at the end of this guide, see page 35. At a glance Caller Display and Call Waiting...
Page 9
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Introduction Your Synergy 3000 Handset and Charger has been designed for ease of use and made to the high standards set by BT Please read the instructions carefully before...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Unpacking your Synergy 3000 For your records Handset and Charger Date of purchase: Check that your Synergy 3000 is complete. If anything is missing, please contact your place of purchase immediately.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Safety information General Never dispose of the batteries in a fire. There is a serious risk of explosion and/or Only use the power supply included with the release of highly toxic chemicals.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Setting up Follow these steps to set up your Synergy 3000 Handset and Charger ready for use Plan the location Connect the power supply to the charger...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 BATTERY LEVELS Install the rechargeable batteries in the handset WEAK HALF-FULL FULL Battery low warning If the handset battery symbol is empty and flashing, and you hear a warning beep every 10 seconds, you will need to recharge your handset before you can use it.
Page 14
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 At the handset: Battery performance (cont) Press the button to enter the menu. Fully discharging the batteries at least once a week will help them last as long as possible. However,...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Note Customer Helpline Your 4 digit PIN number is 0000 unless you have If you have any difficulties setting up or using already allocated a new PIN number as explained your Synergy 3000, please call the Helpline on 08706 058 047.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Using the telephone Preparatory dialling Note To exit and return to the previous menu at any Preparatory dialling allows you to time, press the button. If you press and hold enter the number before pressing button you will return to the standby screen.
Page 17
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To end a call To adjust the speech volume during a call Press the TALK button. During a call: You can adjust the earpiece volume. There are 5 levels to choose from.
Page 18
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Handsfree To answer a call in handsfree Handsfree allows you to talk to your caller When the phone rings: without holding the handset and enables other people in the room to listen to your Press the HANDSFREE button.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Internal calls Dial from the redial list When you have more than one handset Press the UP button to enter the registered to the base you can make internal redial list.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Transferring calls Three-way conversation You can transfer an external call to another You can talk to one external caller handset registered to the base. and another internal caller at the same time on your handset.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Name and number Phonebook To enter M, press the 6 button once. If you enter a digit incorrectly, press You can store up to 50 of your most frequently ✘...
Page 22
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To enter a pause in a stored number Note You can scroll in either direction to search You may want to enter a pause when through the list.
Page 23
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To delete a Phonebook entry Press the button to enter the menu. The display will show PHONEBK, press the button. Use the DOWN button to scroll to DELETE and press the button.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Caller Display and Call Waiting Caller information not available Important With some incoming calls the telephone To use Caller Display or Call Waiting you must number of the caller is not available and first subscribe to your network provider’s Caller...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Calls list To dial a number from the Calls list The Calls list contains the telephone Press the DOWN button to enter numbers of your last 20 callers.
Page 26
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To delete all numbers from the Calls list Note You can enter names up to 8 characters long. Press the DOWN button to enter If necessary, you can edit the entry, when the the Calls list.
Page 27
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To accept a Call Waiting call If you hear the tone that tells you there is another caller, whilst you are on a call: Press the Recall button. The first caller will be put on hold and you can now speak to your second caller.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Handset settings To switch keypad beeps on and off To adjust the handset ringer volume Press the button to enter the There are 5 levels to choose from menu.
Page 29
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To switch auto-talk on/off To set the external or internal ringer melody When the handset is on the charger There are 5 melodies to choose from...
Page 30
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Press the button to enter the To name a handset menu. Use the DOWN button to scroll to The handset name is pre-set as HANDSET and press the button.
Page 31
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Handset Priority To default/reset the handset and base to their original/default factory settings If you have more than one handset registered to the base you can select Please note that if you reset your the handset you want to ring first.
Page 32
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 To de-register a Synergy 3000 additional The default settings are: handset from the base Earpiece volume Handset & Base ringer volume Important Handset & Base melody...
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Help Replacing the handset batteries. No display appears. After a time, you may find that the handset The batteries may be flat or dead. Recharge batteries are running out of charge more or replace the batteries.
Page 34
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Check that: Handset priority is not on, see Cannot adjust an option in the base station. page 29. Is someone else making changes via another handset? Check that: The charger is plugged into the mains power and switched on.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 General information Within the 12 month guarantee period: Guarantee If you experience difficulty using the product, prior to returning your product, please read Your Synergy 3000 is guaranteed for a period the Help section on pages 31-32 or contact the of 12 months from the date of purchase.
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Technical information Only use approved power supply, item code 003313. Use only approved (Ni-MH) rechargeable batteries. Switchboard compatibility This product is intended for use within the...
Page 38
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Helpline Register handset Reset handset/base nternal calls Returning your Synergy 3000 eypad beeps on/off Ring priority Ringer melody anguage handset Location of product Ringer volume ake a call...
Page 39
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 R&TTE This product is intended for use within the UK for connection to the public telephone network and compatible switchboards. This equipment complies with the essential...
Page 40
Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459 Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract.
Need help?
Do you have a question about the Synergy 3000 and is the answer not in the manual?
Questions and answers