Locating A Station By Programme Type; Setting The Clock Automatically - Sony XR-C5109R Operating Instructions Manual

Locating a station by
programme type
You can locate the station you want by
selecting one of the programme types shown
below.
Note
If the countries or regions where EON data is not
transmitted, you can use this function only for the stations
you have tuned in once.
Programme types
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Popular Music
Rock Music
Middle of the Road Music M.O.R. M
Light Classical
Classical
Other Music Type
Weather
Finance
Children's programms
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Not specified
Note
You can not use this function in some countries where no
PTY (Programme Type selection) data is available.
Display
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
NONE
1
Press (PTY) during FM reception until
"PTY" lights up on the display.
INFO
The current programme type name appears
if the station is transmitting the PTY data.
"--------" appears if the received station is
not an RDS station or if the RDS data has
not been received.
2
Press (PTY) repeatedly until the desired
programme type appears.
The programme types appear in the order
as shown in the above table. Note that you
cannot select "NONE" (Not specified) for
searching.
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type appear
alternately for five seconds if the unit
cannot find the programme type and it
returns to the previous station.
Setting the clock
automatically
By receiving CT (Clock Time) data, the clock of
this unit can be set automatically.
During FM reception, press (2) while
pressing (SEL).
"CT" will be displayed, and the clock will
be set.
FM1 CT
100
To cancel the CT function
Repeat the above procedure.
Notes
• The CT function may not work even though an RDS
station is being received.
• The time set by the CT function may not be exact.
EN
11