Philips AT941 User Manual page 14

English
14
6 Put the shaving heads back into the shaving unit.
Make sure that the projections of the shaving heads fit exactly into the
recesses.
7 Put the retaining frame back into the shaving unit (A) and turn the
lock clockwise (B).
8 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
cleaning the trimmer with the cleaning brush (AT941/AT940/
AT897/AT896/AT894/AT891/AT890/AT811/AT756 only)
Clean the trimmer every time you have used it.
1 Switch off the shaver.
2 Push the trimmer slide downwards to open the trimmer.