Grandstream Networks gxv3504 Quick Start Manual page 4

Option A
Step 1:
Insert the power adapter into the 12V DC port
on the GXV3504. Plug the other end of the
adapter into an AC power outlet.
Step 2:
Plug an RJ45 Ethernet cable into the network
port. Plug the other endinto a hub, switch or
router.
Step 3:
Connect the video-out BNC cable of your
camera to one of the video input ports on the
GXV3504. If the analog camera supports audio
output, connect the audio-out BNC cable to
one of the audio input ports of the GXV3504.
Option B
Step 1:
Plug an RJ45 Ethernet cable into the network
port. Plug the other end into a power over
Ethernet (PoE) switch.
Step 2:
Connect the video-out BNC cable of your
camera to one of the video input ports on the
GXV3504. If the analog camera supports audio
output, connect the audio-out BNC cable to
one of the audio input ports of the GXV3504.
If the GXV3504 is properly connected, the POWER,
READY and NETWORK indicator lights will flash green.
~3~
Gxv
3504 CONFIGURATION
Configuring the GXV3504 using Microsoft
Internet Explorer
Connect the GXV3504 to the DHCP server
S
tep 1:
Navigate your browser to:
http://www.grandstream.com/support/gxv_
series_surveillance/general/resources/gs_search.zip
S
tep 2:
Run the Grandstream GS_Search tool, that
you just downloaded.
S
tep 3:
Click on
device detection
S
tep 4:
The detected devices will appear in the
Output field
button in order to begin
~4~