Choose A Calling Card - Nokia 8290 User Manual

Dialing sequence
Access no.
+ Phone no.
+ Card no.
Access no.
+ Card no.
+ Phone no.
Prefix
+ Phone no.
+ Card no.
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
6 Enter the access number (usually the 1-800 number listed on the back
of the calling card), then press OK.
7 Enter the card number and/or PIN, then press OK.
8 Your phone displays Save changes? Press OK.
9 Scroll to Card name: and press Select.
10 Enter the card name, then press OK.

Choose a calling card

1 Press Menu 4 4 2.
2 Scroll to the card you want to use, then press Options.
3 Select is highlighted; press OK.
4 Enter your security code, then press OK.
Use for cards
that require you to:
Dial the 1-800 access number,
then phone number, then card
number (+ PIN if required).
Dial the 1-800 access number,
then card number (+ PIN if
required), then phone number.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required).
[ 46 ]
Cards using
this sequence
MCI, AT&T True
Choice, Sprint
Canada, Unitel
networkMCI,
WorldPhone MCI
GTE, PacBell, AT&T,
Stentor