Table of Contents
Advertisement
Answer a call while the phone is locked
Press any key except
Change your lock code
1
Press Menu 4 - 3 - 2 - 3 (Settings > Security settings > Access
codes > Change lock code).
The message Enter lock code appears.
2
Enter the lock code. (The default lock code is 1234, or the last four digits
of your phone number, depending on your service provider.) Press OK.
3
Enter the new lock code. Only numeric characters are accepted. To
prevent accidental emergency calls, don't enter a code that is similar
to an emergency number.
4
Press OK.
5
Verify the new lock code, and press OK. Store your new code in a safe
place, away from your phone.
• USE KEYGUARD TO LOCK THE KEYPAD
The Keyguard feature lets you lock the keypad to prevent accidental key
presses while your phone is in a pocket or purse. If you press a key while
Keyguard is activated, a message appears: Press Unlock and then *.
Note: When Keyguard is on, it may be possible to make emergency
calls (for example, 911, or other official emergency number). Key in
the emergency number and press
only after you have keyed in its last digit.
Activate keyguard
•
Press and hold
during a call, the call will end.), OR...
•
At the Start screen, press Menu
•
At the Start screen, press Menu 1 - 0, OR...
•
At the Start screen, press Menu. Scroll to Keyguard, and press Select.
or
.
until Keys locked
[ 59 ]
. The number is displayed
appears. (If you do this
, OR...
Security
Advertisement
Table of Contents
