Power On The System - Konig SAS-DVRSET35 Manual

ENGLISH

Power on the system

After connecting the connection cables of the
cameras and the monitor, connect the power
cable to the DVR and wall outlet. Press the
power button on the rear panel to power on
the system. you enter the system initialising
screen.
After system initialising is finished, the DVR
automatically shows the live screen of the
connected cameras (1, 2, 3 or 4). This is called
live mode.
MAIN MENU
In live mode, click on menu button on the
front panel or on the remote control to enter
the main menu interface. Alternatively, right-
click the mouse to show the toolbar with the
main menu icon.
In the main menu mode, you can control
device management settings, such as display,
record, network, search, device, system and
advanced settings etc. See next page for the
site map of the main menu.
9