Bluetooth problems Possible solutions
The Elite 9145 won't
pair with my phone.
The Elite 9145 doesn't
ring when my mobile
phone does.
The Elite 9145 paired
with my phone, but
I can't hear anything
through the handset.
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone
line from causing interference on your phone. To get a line filter, contact
your service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the
filter. Make a test call to make sure the noise is gone.
Elite9145om_20110115.indd 35
Making sure your phone is in pairing mode. Check
x
your phone's manual for instructions on Bluetooth
device pairing.
Making sure your phone supports the Bluetooth
x
hands-free profile.
Making sure your phone is in range of the base.
x
If Elite 9145 appears in your mobile phone's paired
x
device list, remove it and try pairing again.
Turn your phone off, then turn it on again. Repeat
x
pairing steps.
Disconnecting the base AC adapter. Wait a few
x
minutes, then reconnect it. Repeat pairing steps.
Checking the link order for that phone. In rare
x
cases, some mobile phones may not be linked as
the third or fourth mobile phone.
Making sure your phone has Bluetooth turned on.
x
Checking if the Elite 9145 is on the paired device
x
list on your mobile phone and is in connected
status. If not, try pairing again.
Making sure your phone doesn't connect with
x
other Bluetooth devices.
Making sure your phone is in range of the base.
x
Making sure the handset's ringer is not turned off.
x
(The base doesn't ring on mobile calls.)
Adjusting the handset volume.
x
Setting your mobile phone to transfer the audio to
x
a Bluetooth device. Check your phone's manual for
instructions on Bluetooth setup and options.
Erase the Bluetooth pairing and repair the mobile
x
phone to the base again. To delete the Bluetooth
pairing, see page 19.
35
28/9/11 12:14:50 PM