Advertisement
Installing your Switch2
Before you begin, make sure that your USB keyboard and mouse work
properly with both computers.
1. Power on your computers.
2. Connect your monitor, keyboard, mouse, and speakers to the base.
Insert the battery into the wireless remote (positive side facing out)
and place the remote anywhere on your desk within 10 feet/3 metre
of the base.
Switch2 Tip:
Use the included fastener strip to attach the
remote to your monitor, keyboard, desk, or
other item.
Installing your Switch2 | 3
3. Connect one set of cables to the monitor, USB, and speaker ports
on your fi rst computer. Wait for your computer to recognize the
new USB device (Switch2). Then connect the other set of cables to
the monitor, USB, and speaker ports on your second computer. If
the cable is not long enough to connect to your speaker port, use
the included audio extension cable.
You are now ready to use your Switch2.
Switch2 Tip:
Keep the base behind your computers to keep
your desk free of cable clutter.
Installing your Switch2 | 4
Advertisement
